The ISA-101 wireless anemometer and thermometer has a separate probe and achieves high accuracy measurements of \u00b12 % across a wide range of wind speeds from 0.01 to 30 m\/s. On-site operability is improved by Bluetooth communications, and the air speed and temperature can be checked at hand using the special large screen display unit.
\nThe display unit is not only wireless, but can also be connected with a cable. This instrument is compliant with JIS anemometer regulations (JIS T 8202), so a traceability system diagram and a calibration certificate can be issued whether for the probe alone or in combination with the display unit.
\nAir volume calculations, graphs, and continuous data intake and storage can be easily performed by installing a special application on an iOS (iPhone, iPad) or Android device. <\/p>\n
\u25cf Bluetooth\u00ae Capable
\nMeasurements can be wireless within the wireless communication range (approximately 5 m), and the probe can be separated for measurements at high places for example. When taking air speed and temperature measurements, a measurement person can be responsible for the probe, and a recording person can be responsible for the display unit. <\/p>\n
\u25cf Measurements with the Display Unit are Simple
\nIn addition to displaying the measurement values, the measurement values can be paused, the time constant can be switched, continuous measurements can be performed for an average of 10, 30, or 60 seconds, and maximum and minimum values can be calculated. The display panel has a white back light, so the air speed and temperature measurement values can be checked even in the dark. <\/p>\n
\u25cf The Probe can be Bent or Straight
\nThe probe is marked with a numerical scale and can be used whether straight or bent at a right angle. The probe is equipped with control buttons for basic operations such as starting or stopping measurement, or holding measurement values. In addition, communication status and battery level can be checked with the LEDs. <\/p>\n
\u25cf Capable of Measurements up to a Ceiling Height of 2700 mm
\nThe probe is equipped with an extension, so wind speed and temperature can be measured up to a ceiling height of 2700 mm. A commercially available monopod or tripod can also be used for measurements at even higher locations. The probe is marked with numerical scale, has a maximum O.D. of 10 mm, and can be fastened either straight (model I) or at a right angle (model L). It is convenient for measurements inside ducts, and the insertion position of the wind speed sensor can be checked in mm increments. It can also be inserted in duct measurement ports with non-Japanese standards (3\/8 inch). <\/p>\n
\u25cf Wide Wind Speed Range and High Measurement Accuracy
\nIt covers a wide wind speed range from 0.05 m\/s to 30 m\/s. It provides measurement accuracy of \u00b12 %. <\/p>\n
\u25cf Special Carrying Case Provided
\nA special carrying case is provided for the ISA-101 anemometer and thermometer. In addition to the display unit and probe, it can hold the cable. <\/p>\n
\u25cf Measurement Values can be Checked in Real Time with the Special Application
\nFurthermore, calculations and data storage are also possible.<\/p>\n","protected":false},"excerpt":{"rendered":"
\u3000<\/p>\n","protected":false},"featured_media":0,"menu_order":0,"template":"","meta":{"_acf_changed":false},"categories":[31,45],"tags":[],"class_list":["post-58932","item","type-item","status-publish","hentry","category-cate2","category-cate2-14","entry"],"acf":[],"yoast_head":"\n