\u30fb Both the lid and the body are thickly made to withstand the decompression.
\n\u30fb Comes with a magnetic middle plate.
\n\u30fb Use a desiccant on the bottom of the main unit under the middle plate.
\n\u30fb It can be connected to a decompression pump and dried and saved in a decompression state.<\/p>\n
\u25cf How to use a glass desiccator
\n\u30fb Put a desiccant in a crystal dish or a share and place it on the bottom of the main unit.
\n\u30fb Place the middle plate on the main unit.
\n\u30fb Place the reagent on the middle plate.
\n\u30fb Apply grease or vaseline between the lid and body, turn the lid or slide to spread it evenly.
\n\u30fb When reducing pressure, open the cock and gradually decompress with aspillator or reduced pressure pump. After reducing pressure, close the cock.
\n\u30fb If you have reduced the reagent, open the cock and return to the normal pressure. At this time, the cock gradually opens to prevent the reagent from rolling up.
\n\u30fb When opening the lid, slide the lid sideways and open it.<\/p>\n
\u25cf Precautions for using glass decicata
\n\u30fb Be careful not to drop it because it is heavy on the lid and the body.
\n\u30fb If you stick to the main unit when opening the lid, do not try to open it. Make sure that the inside is normal, and tap it lightly with a mallet or plastic hammer from the side of the lid.
\n\u30fb When reducing pressure, make sure that there is no scratches, cracks, and cracks.
\n\u30fb Because it is thick, it is resistant to reduced pressure, but is not suitable for heating applications. It may be damaged by the temperature difference between the heating part and the non -heated part.<\/p>\n","protected":false},"excerpt":{"rendered":"
\u3000<\/p>\n","protected":false},"featured_media":0,"menu_order":0,"template":"","meta":{"_acf_changed":false},"categories":[2,16],"tags":[],"class_list":["post-72241","item","type-item","status-publish","hentry","category-cate1","category-cate1-14","entry"],"acf":[],"yoast_head":"\n