080000-1000 F-1K Fiber monitor Model F-1K

Product photo
Item Code		080000-1000
Model		F-1K
Measurement Range		0.0-1000F/L
Light Source		Semiconductor laser
Measurement Mode		Downtime, manual, logging
Output		● USB ●RS-232C ● Printer ● Alarm (open collector)
Rechargeable battery operating time		About 4 hours continuous operation (25 ° C)
Mass		Approximately 5.2kg
Suction Flow Rate		2L/min
Display		LCD (touch panel)
Display Content		● Count (count) ● Fibric particle concentration conversion value (F/L) ● Time (current time, setting, progress, remaining time) ● Success flow rate ● Various abnormalities (laser output, battery, etc.)
Operating Environment		0 to 40 ° C 5-90%RH (no condensation)
Power Supply		Combined use of AC100V (AC adapter) and nickel hydrogen battery 43.2Wh (9.6V, 4500mAh)
Size		380 (W) x 230 (D) x 240 (H) mm (excluding protrusions)
Accessories		AC adapter, hard case, zero filter, transparent bag for storage
Price (excluding tax)		Contact us
Note		The Fiber Monitor F-1K type is a measuring instrument that can sort out only fibrous particles such as asbestos from among the particles floating in the air and relatively calculate the fiber number concentration. Sample air is introduced into the inside from the air sampling port by the suction pump, passes through the detection unit, the sampling holder, the flow sensor, and is exhausted inside the housing. Fibers that match the count analysis value by phase-contrast microscopy can be sorted out and densitized. It can be used for monitoring, etc. for environmental management in asbestos treatment work. ● Data can be saved by logging measurement. ● An alarm notifies you when the set concentration is exceeded. (It can also be connected to an alarm device, etc.) ●It is possible to connect to a PC for constant monitoring. ●The backup filter can also be used for counting analysis. ●Displays fibrous particle concentration (f/L) in real time. (60s update)