General Lab Equipment
Viscometer Water Bath VB-5
This water bath is used to measure kinematic viscosity with viscometers such as Canon Fenske, Canon Fenske reverse flow, Ubbelohde, and Ostwald. It is compliant with IQ/OQ standards.
Features
●High-resolution digital temperature controller and propeller-type pump enable precise temperature control.
●Standard stopwatch included.
●Equipped with LED lights for better visibility.
●Can suspend up to six glass viscometers.
●Cooling water pipes installed within the bath ensure stable temperature control near room temperature (a separate low-temperature circulation bath is required).
●Sloped design within the bath improves drainage performance.
●Automatic temperature correction feature.
●Equipped with a dry-run prevention function.
Features
●High-resolution digital temperature controller and propeller-type pump enable precise temperature control.
●Standard stopwatch included.
●Equipped with LED lights for better visibility.
●Can suspend up to six glass viscometers.
●Cooling water pipes installed within the bath ensure stable temperature control near room temperature (a separate low-temperature circulation bath is required).
●Sloped design within the bath improves drainage performance.
●Automatic temperature correction feature.
●Equipped with a dry-run prevention function.
Information by Item Code (Specifications)
| Item Code | 051260-05 | |
|---|---|---|
| Model | VB-5 | |
| Ambient temperature | 5 ～ 35℃ | |
| Connection | ||
| Temperature setting method | Main heater: Digital temperature instruction tube (PID control method) Launch resolution No 0.01 ° C Sub -heater: liquid expansion temperature control system (ON/OFF control method) |
|
| Temperature sensor | Pt100Ω | |
| Number of Suspended Viscometers | 6 | |
| Temperature Adjustment Precision | ± 0.1 ° C (when used in constant temperature room) | |
| Heaters | 350Ｗ×2, 600Ｗ×1, SUS316L | |
| Stop watch | ・Measurement channels: 3 channels (2-mode type) ・Display type: 5-digit LED ・Measurement range: 0 to 9999.9 seconds |
|
| Drain Valve | Nozzle outer diameter φ10.5mm | |
| Safety features | ・Leakage circuit breaker ・Over-temperature prevention function ・Dry-run prevention function |
|
| motor | Stirring induction motor: 4 poles, 15 W | |
| Size | Water bath:335 (W) × 180 (D) × 315 (H) mm, approximately 19 L Main Body: 530 (W) × 236 (D) × 440 (H) mm (excluding protrusions and motor) Weight: approximately 23 kg |
|
| Temperature Control Accuracy | ±0.1°C (when used in a temperature-controlled environment) | |
| Temperature setting | Room temperature +10 to 90°C (without using cooling water) * 1 | |
| Operating Environment | +5 ℃ ～ +35 ℃ | |
| Power Supply | AC100V 50/60Hz 14A | |
| Accessories | Thermometer holder ※2 : 1 piece, Mounting brackets: 6 pieces | |
| Price (excluding tax) | Contact us | |
| Note | ※1: To adjust the temperature near room temperature, connection to a low-temperature circulating water tank is necessary. ※2: Please prepare a thermometer separately. (The size of the thermometer that can be held by the included thermometer holder is φ6–7 mm.) ※3: Traceability is only available for the stopwatch. |
|