Glassware
Screw-caps with Menbrane Filter GLS-80
-The screw entrance membren caps can be used for the GL-45 and GLS-80 screw duRan bottle.
・ Since a ptfe film with a hole diameter of 0.2 μm is attached to the hole opened in the center position of the cap, only the gas is transmitted without passing through liquid or dust.
・ The danger of storing and transporting reagents that generate gas can be reduced.
・ When applying an auto crave, the caps can be tightly tightened, so you do not need to loosen the cap in advance or re -tighten after sterilization.
・ Compatible with rapid decompression and pressurization up to 100 HPA. The heat -resistant temperature is 140 ° C, and it can be used repeatedly if there is no damage such as scratches.
・ Since a ptfe film with a hole diameter of 0.2 μm is attached to the hole opened in the center position of the cap, only the gas is transmitted without passing through liquid or dust.
・ The danger of storing and transporting reagents that generate gas can be reduced.
・ When applying an auto crave, the caps can be tightly tightened, so you do not need to loosen the cap in advance or re -tighten after sterilization.
・ Compatible with rapid decompression and pressurization up to 100 HPA. The heat -resistant temperature is 140 ° C, and it can be used repeatedly if there is no damage such as scratches.
Information by Item Code (Specifications)
| Item Code | 017250-8031A | |
|---|---|---|
| Model | GLS-80 | |
| DIN Thread(GL) | GLS-80 | |
| Colour | Blue | |
| Membrane Filter | 0.2μMptfe | |
| Number of holes | Approximately φ9mm x 3 | |
| Gaskets | none | |
| Maximum operating temperature | 140 ° C | |
| Material | polypropylene | |
| Quantity | 2 | |
| Price (excluding tax) | Contact us | |
| Note | ||