Glassware
Dispensers, “Macro Pipet”, with tip
・ By turning the push button, the adjuster moves along the scale of the display board. If you tighten the lock screws to the scale of the display board, you can make good reproducibility.
・ Since the contact of the sample solution when sucking is only inside the tip, the body is not contaminated. It can be used continuously by replacing the chips.
・ The grip is lightweight and soft operability. Can be used with one hand.
・ 5 years warranty
・ Use PP for the glue part, piston is PTFE
・ Since the contact of the sample solution when sucking is only inside the tip, the body is not contaminated. It can be used continuously by replacing the chips.
・ The grip is lightweight and soft operability. Can be used with one hand.
・ 5 years warranty
・ Use PP for the glue part, piston is PTFE
Information by Item Code (Specifications)
Item Code | 025060-010 | |
---|---|---|
Standard | 10ml | |
Scale | 0.5 | |
Accuracy(%) | ± 1 | |
Reproducibility(%) | ± 1 | |
Dispensing capacity | 2-10 ml | |
Accessories | ・ 1 chip ・ Grease 1 -pin press (jigs) 1 |
|
Price (excluding tax) | Contact us | |
Note |