General lab equipment
Vacuum Controller Model V-303
● Color LCD display
● Uses a touch panel and push dial, and the vacuum value and hysteresis settings can be set smoothly.
● The back support can be easily fixed to existing Shaft Anle, etc.
● A vacuum control device using a semiconductor pressure sensor.
● Prevents boiling solvents and increases the recovery rate.
● The material for the vacuum line is SUS316, and the seal material is FKM (fluorine rubber), which has excellent solvent resistance.
● The display is absolute pressure.
● Uses a touch panel and push dial, and the vacuum value and hysteresis settings can be set smoothly.
● The back support can be easily fixed to existing Shaft Anle, etc.
● A vacuum control device using a semiconductor pressure sensor.
● Prevents boiling solvents and increases the recovery rate.
● The material for the vacuum line is SUS316, and the seal material is FKM (fluorine rubber), which has excellent solvent resistance.
● The display is absolute pressure.
Information by Item Code (Specifications)
| Item Code | 044460-5 | |
|---|---|---|
| Model | V-303 | |
| Measurement Target | Sus316 and gas that does not corrode fluorine rubber | |
| Measurement Range | 0-1100HPA (MBAR) | |
| Connection | Hose joint (outer diameter φ9.65mm) | |
| Display Resolution | 1HPA (MBAR) | |
| Measured pressure | Absolute pressure | |
| Control method | Electromagnetic valve for vacuum line (external electromagnetic valve unit) Electromagnetic valve for air opening (equipped with this product) |
|
| pressure sensor | Silicon semiconductor sensor | |
| Display unit | HPA or MBAR | |
| Mass | Approximately 0.95kg | |
| Display method | Color touch panel / push dial | |
| Power Supply | AC100V ± 10V 50/60Hz 1.1a | |
| Size | 134 (W) × 87 (D) × 103 (H) mm (not included) | |
| Accessories | Y -shaped tube (3 -way tube), outlet adapter (2P/3P conversion plug), preliminary fuse (2A) | |
| Price (excluding tax) | Contact us | |
| Note | ||
Related information
- catalog