General lab equipment
Glass tube oven GTO-3000 Rotary Heating Type
・ It is a small capacity vacuum heating device that can distill / sort / dry / sublimate small -capacity samples while heating under reduced pressure.
・ Depending on the sample capacity, the lineup is broadly divided into two types, GTO-2000 type and GTO-3000 type.
-The rotation heating type can rotate and heat under reduced pressure, so it can easily and quickly perform heat -sensitive substances and high -boiling substances.
-The sample container is made of glass, and it is possible to observe the internal sample during heating heating.
・ Generally, Kugel Roll is called “Kugel Roll: Kugelrohr (German) ball (kugel) and tube (ROHR)”.
● The maximum temperature can be set to 350 ° C
● Glass coating heater with a vacuum jacket with a high heat insulation effect A heater block section with a degree of inclination (free lock block)… Dry type
● A temperature rising program is possible up to 9 patterns per pattern
● Analog output that can be connected to a commercial recorder. Standard equipment > ● IQOQ support
https://www.sibata.co.jp/topics/topics-37026/ "Target =" _ blank "REL =" NOOPENER "> Glass tube oven explanation by Ku-chan
・ Depending on the sample capacity, the lineup is broadly divided into two types, GTO-2000 type and GTO-3000 type.
-The rotation heating type can rotate and heat under reduced pressure, so it can easily and quickly perform heat -sensitive substances and high -boiling substances.
-The sample container is made of glass, and it is possible to observe the internal sample during heating heating.
・ Generally, Kugel Roll is called “Kugel Roll: Kugelrohr (German) ball (kugel) and tube (ROHR)”.
● The maximum temperature can be set to 350 ° C
● Glass coating heater with a vacuum jacket with a high heat insulation effect A heater block section with a degree of inclination (free lock block)… Dry type
● A temperature rising program is possible up to 9 patterns per pattern
● Analog output that can be connected to a commercial recorder. Standard equipment > ● IQOQ support
https://www.sibata.co.jp/topics/topics-37026/ "Target =" _ blank "REL =" NOOPENER "> Glass tube oven explanation by Ku-chan Information by Item Code (Specifications)
| Item Code | 050600-30001 | |
|---|---|---|
| Model | GTO-3000 rotation heating | |
| Analog output | 0 to 400mv (0 to 400 ° C) | |
| Heater capacity | Approximately 800W | |
| Temperature control range | Room temperature + 5-350 ° C | |
| Safety function | Heater disconnection warning, temperature sensor abnormality warning, over -temperature prevention function Rotating part abnormality warning (rotating heating type), upper and lower temperature abnormal warning |
|
| Timer function | On -amer, off -timer (99 hours 59 minutes 59 seconds each) | |
| Rotation adjustment range | 0 to 60rpm (stepping motor) | |
| Outer diameter of Center joint | About 10mm (diameter) | |
| Sample bulb | 30ml (φ60mm) | |
| Temperature sensor | Platinum measurement temperature resistor 3 wires 100Ω | |
| Temperature control method | PID control | |
| Allihn condenser | φ40mm x 3 | |
| Mass | About 16kg | |
| display | LCD display with backlight (20 digits x 4 lines) | |
| Program function | 9 steps (1 step: 99 hours 59 minutes 59 seconds) x 9 patterns can be registered | |
| Reaching vacuum degree | 1.3HPA (at 10rpm) | |
| Operating Environment | 5-35 ° C | |
| Power Supply | AC100 to 240V 50/60Hz 800VA | |
| Size | 680 (W) x 250 (D) x 390 (H) mm | |
| Price (excluding tax) | Contact us | |
| Note | ||
Related information
- catalog
- Manual