Specifications

Environment

High Volume Air Sampler HV-RW / aerosol sampling

・ This weatherproof sampler is intended for installation in order to collect toxic substances in the air at high flowrates.
・ It has a wide flowrate range, and can be used for both dust and dioxins by replacing the components.

● The folding design is convenient for transport and storage.
● The constant flowrate unit suppresses suction flowrate drops associated with collecting volume increases.
● A touch panel is used for the display unit.
● Particle separation characteristics can be obtained by attaching an optional particle size separator.
● It is designed to operate quietly.

Information by Item Code (Specifications)

Item Code 080130-1201
Model HV-RW(for Dioxins)
Suction Pump Brush-less blower
Flow Rate Detection Differential pressure detection system
Power Failure Processing Operation prior to the outage continues after recovery from the outage
Flow Accuracy Within ±5 % of the set flowrate value
Material Aluminum
Set Flow Rate Range 100~1200L/min
Filter Paper 8X10square filter paper
Urethane Foam nothing
Mass Approximately31kg
Suction Flow Rate 1000L/min
(square filter QR-100+)
Display Touch panel LCD screen (with backlight)
Operating Environment Temperature 0-40ºC
Power Supply AC180-264V 5A Cable length : 3m
Size While using : 575(W)x575(D)x1420(H)mm, Collection port height : 1210mm(From the installation surface)
Folded state : 575(W)x575(D)x960(H)mm
Composition Shelter 1 set
Control unit 1 set
Hopper part 1 set
Filter case 1set
Through pipe 1 set
Price (excluding tax) Contact us
Note  

Options and Spare Parts

Filter Case for 8×10 rectgular filter
Control Unit HV-RW-K1 for HV-RW
Shelter HV-RW-S1 for HV-R/RW
HV-R/RW Hopper
HV-1000F Through Pipe
HV Series Shuttle Tube

Related information