Water Quality Test / Food Sanitary Control
Handy Water Meter AQUAB AQ-201P
This product can measure low-concentration residual chlorine in tap water, etc. in work sites as a food sanitation measure. It uses DPD reagent. The concentration of free residual chlorine can be obtained by using only the DPD reagent and the total residual chlorine and the combined residual chlorine concentration can be obtained by using potassium iodide together with the reagent. In food processing sites, use of glass products may be prohibited in order to prevent any broken glass pieces from getting mixed in foods. The AQ-201P AQUAB handy water quality meter uses a sample cell made of PET instead of glass.
■ Main Functions
● Memory function
Measurement values are automatically saved up to 99 points.
In memory check mode, you can check the measurement value immediately.
● Turning the power OFF automatically or manually
The power can be automatically turned OFF even if you forget to turn it OFF. You can also turn the power OFF manually.
● For measuring residual chlorine
Tap water is disinfected with chlorine in order to secure sanitation. Residual chlorine indicates the available chlorine remaining in tap water in a state that it has a disinfecting effect. DPD method is used as a legally-specified procedure to check and measure residual chlorine concentration.
The AQ-201P is a residual chlorine comparator that uses the DPD method and can measure up to 2.00 mg/L of residual chlorine concentrations. It uses a sample cell made of PET instead of glass so it can be used in food processing sites where use of glass products is prohibited. The concentration of free residual chlorine can be obtained by using only the DPD reagent and the total residual chlorine and the combined residual chlorine concentration can be obtained by using potassium iodide together with the reagent.
■ Main Functions
● Memory function
Measurement values are automatically saved up to 99 points.
In memory check mode, you can check the measurement value immediately.
● Turning the power OFF automatically or manually
The power can be automatically turned OFF even if you forget to turn it OFF. You can also turn the power OFF manually.
● For measuring residual chlorine
Tap water is disinfected with chlorine in order to secure sanitation. Residual chlorine indicates the available chlorine remaining in tap water in a state that it has a disinfecting effect. DPD method is used as a legally-specified procedure to check and measure residual chlorine concentration.
The AQ-201P is a residual chlorine comparator that uses the DPD method and can measure up to 2.00 mg/L of residual chlorine concentrations. It uses a sample cell made of PET instead of glass so it can be used in food processing sites where use of glass products is prohibited. The concentration of free residual chlorine can be obtained by using only the DPD reagent and the total residual chlorine and the combined residual chlorine concentration can be obtained by using potassium iodide together with the reagent.
Information by Item Code (Specifications)
Item Code | 080560-2010 | |
---|---|---|
Model | Type AQ-201P | |
Measurement Principle | Absorptiometry by DPD reagent | |
Measurement Range | 0.00~2.00mg/L | |
Light Source | LED | |
Resolution | 0.01mg /L | |
Measurement Item | Concentration of available chlorine (Free residual chlorine by only DPD reagent) | |
Measurement Method | Permeation absorption measurement | |
Measuring Cell | Vial bottle with 24mm cap/Material Body: PET Cap: PP | |
Display Format | Digital Numbers | |
Data Recording | 99points | |
Sample Water Volume | 10mL | |
Automatic Power off | Auto-off after about 120 seconds of key operation | |
Light Receiving Section | Photodiode | |
Mass | Approximately250g | |
Measurement Time | Approx.2 seconds for both zero-point recognition and consentration measurement | |
Power Supply | AAA batteries 4, | |
Size | 70(W)x142(D)x63(H)mm | |
Accessories | Powder reagents 25 packs Sample cells (PET) 2 pieces AAA alkaline batteries 4 pieces Carrying case Quick manual |
|
Price (excluding tax) | Contact us | |
Note |
Options and Spare Parts
Powder Reagent for Residual Chlorine DPD Method 100 pcs
Powder Reagent for Residual Chlorine DPD Method 500 pcs
Water Quality Testing Potassium Iodide / 20 g
Test Tube for AQUAB AQ-102P/AQ-201P/AQ-202P