Specifications

Animal Testing Environmental Test Chambers

Dust feeder DF-5

This device causes a large amount of solid particles such as mineral dust. It is composed of a clean air unit, air ezector, turntable, vibrator, hopper, etc., and puts powder from the hopper on the groove in the circle in the turntable, sucks it with an air ezector, and mixes with primary air. , Supply as aerosol.

● You can generate a high concentration aerosol and change the amount of generated.
● Digital dust meter and control unit can be controlled by connecting with control units.


■ Applications
1. Performance test of powdered body -related devices, dust dust dust equipment
2. Animal experiment, dust inhalation test < /p>
* Air compressors and clean air units are required for this device separately.

Information by Item Code (Specifications)

Item Code A80180-011
Model DF-5
Capacity Approximately 1.5L
Timer 15 minutes to 6 hours optional settings
Amount Generated Max. 5g/min (turnring TA-5)
Aerosol Flow Rate 60-150L/min
Hopper Capacity Approximately 1.5L
Occurrence Time 4 hours consecutive
Primary Side Air Pressure 0.2MPa or more, flow rate 160L/min,
compressor (optional)
Mass Approximately 35kg
Calculation Formula for Generated Concentration Dust feeding concentration concentration calculation formula with dust feeds


Current concentration (G/M 3 ) = Each minute generated amount (cm 3 /min) × powdered casual density ρb (G/cm 3 ) × generation efficiency k × generation flow rate (min/m 3 )


Example) Dust feeder DF-3 type TA-32 powder dust concentration (k = 0.3)

Minimum 0.1 (cm 3 /min) x 0.2 (G/cm 3 ) × 0.3 (1000/400) (min/m 3 ) = 0.15g/m 3

Up to 1.0 (cm 3 /min) x 0.2 (G/cm 3 ) × 0.3 (1000/400) (min/m 3 ) = 1.5g/m 3


* 1 The 0.3 of the occurrence efficiency means 70%of the dust provided by piping, etc., and 30%reaches the test system. The actual occurrence efficiency depends on what kind of testing system is formed.

* 2 The powdered body density depends on the powder used.
Power Supply AC100V 50/60Hz 2A
Size Occurrence unit: 600 (W) x 390 (D) x 720 (H) mm
Price (excluding tax) Contact us
Note  

Related information

catalog
Manual