Chemical Plant Equipments
Simple distillation device HP -1000 -T type
Basically, it is a minimal part required, and is the simplest -filled -type distiller, and is suitable as an experimental device. In addition to adopting a temperature adjuster, it is possible to set the return ratio by the built-in timer. It is not suitable for distillation of high boiling points and high viscosity.
* The temperature range of the above used is the temperature inside the distillation flask. * A separate vacuum pump is required when using under reduced pressure.
* The temperature range of the above used is the temperature inside the distillation flask. * A separate vacuum pump is required when using under reduced pressure.
Information by Item Code (Specifications)
| Item Code | --- | |
|---|---|---|
| Filling | Helipack No.2 (SUS316) | |
| Use | Simple type, for experiments | |
| theoretical plate number | 35 steps | |
| Hold up | 30-50 ml | |
| throughput | Max. Approximately 1.4 L/H (N-Heptan) | |
| Number of preparations | 200-800 ml | |
| drop in pressure | max.1.463 kpa | |
| Distillation column | Filling type φ22 × 1000 mm Vacuum cloak |
|
| Distillation flask | 500ml, 1L | |
| Heating mantle | AC100V, 500W, 300V, 1000V 450V | |
| Reflux ratio timer | Sample collection 0 to 999 seconds Return style 0-999 seconds |
|
| pressure range | FULL VACUUM -Regular pressure | |
| Operating Environment | Room temperature ~ 300 ° C | |
| Power Supply | AC 100V 0.6kva | |
| Size | 650 (W) x 450 (D) x 2000 (H) mm | |
| Price (excluding tax) | Contact us | |
| Note | ||
Related information
- Catalog