Chemical Plant Equipments
Film Evaporator Thin film type concentrated device FE -80
This device (FE-80 type) is a thin film evaporation and concentration device due to rotating feathers. By heating a thin film forced under a rotating feather in the concentrated device under reduced pressure, it is possible to treat substances that are unstable to heat and high viscosity in a short time. The feathers whose tip material is ptfe rotate, and one end is pressed against the inner wall of the concentrate and selected. When the raw material liquid is supplied from the top, the liquid becomes a turbulent film due to the rotation range of the feather and heated on the inner wall. The generated steam rises the inside of the vessel, condensed and recovered with a cooler, while the concentrated solution flows into the concentrated liquid reception.
* The standard price does not include control boards, control instruments, vacuum systems, dust supply equipment (queu-ring tower-, frozen machine, boiler, etc.), local assembly work and transportation costs. I will estimate.
[Features]
● Waipa-and the sample flowing walls are in contact, so the sample is baked.
● Because the sample is forcibly film, the overall heating agreement is large and the amount of processing is large.
● The material is glass, PTFE, stainless steel, so it has excellent corrosion resistance.
● Since the PTFE packing is used for the joint, there is no contamination of foreign substances such as glys in the sample.
● You can process high viscosity samples.
* The standard price does not include control boards, control instruments, vacuum systems, dust supply equipment (queu-ring tower-, frozen machine, boiler, etc.), local assembly work and transportation costs. I will estimate.
Information by Item Code (Specifications)
Item Code | --- | |
---|---|---|
Processing Capacity | Hot water 85 ° C: 1 L/H, St-200 KPA: 2 L/H, Conditions: Samples are water, vacuum 0.5 kpa (40 mmhg) |
|
pressure range | Inside the shell FULL VACUUM -Regular pressure In the jacket max.200 kpa |
|
Evaporator | Heat transmission area 0.075 m 2 | |
Condenser | Heat transmission area 0.5 m 2 | |
Receiver | Condensed liquid reception 5 L 1 Concentrated liquid reception 5 L 1 |
|
Wiper | Body/SUS304, blurr/PTFE x 4 bottles | |
motor | AC100V, 90 W, 0 to 300 RPM (50Hz) | |
Operating Environment | In the shell max.150 ℃ In the jacket max.180 ℃ |
|
Size | 700 (W) x 600 (d) x 2200 (H) mm | |
Price (excluding tax) | Contact us | |
Note |
Related information
- Catalog