Environment
Filter Performance Test Machine MTS-R1
The model MTS-R1 is designed to measure filtration efficiency and air flow resistance of respirator filter media and to determine whether the respirator filter needs to be replaced or not. MTS-R1 is also useful in quick in-line production filter testing.
This model simply uses ambient air particles for the measurement so there is few preparation and instrument space needed for the test to determine pass or fail. The particle filtration efficiency is calculated from the particle counts measured in the upstream and the downstream using light scattering measurement principle. In addition, installed differential pressure sensor simultaneously measures air flow resistance of the filter.
Features
●Enables a p article filtration efficiency test by simply utilizing the existing particles in a room air
*A separate particle generator may be required if the testing environment is low in particle concentration.
●Enables to register up to 10 t ypes of filters
●Automatically corrects instrumental variations
●Easy setups using a t ouchscreen
●Displays errors messages in the event of any function abnormality
This model simply uses ambient air particles for the measurement so there is few preparation and instrument space needed for the test to determine pass or fail. The particle filtration efficiency is calculated from the particle counts measured in the upstream and the downstream using light scattering measurement principle. In addition, installed differential pressure sensor simultaneously measures air flow resistance of the filter.
Features
●Enables a p article filtration efficiency test by simply utilizing the existing particles in a room air
*A separate particle generator may be required if the testing environment is low in particle concentration.
●Enables to register up to 10 t ypes of filters
●Automatically corrects instrumental variations
●Easy setups using a t ouchscreen
●Displays errors messages in the event of any function abnormality
Information by Item Code (Specifications)
| Item Code | --- | |
|---|---|---|
| Model | MTS-R1 | |
| Measurement Range | Filtration efficiency: 0 - 100.00% Air flow resistance: 0 - 1000 Pa |
|
| Measurement Method | Filtration efficiency: light-scattering optical particle counter Air flow resistance: semiconductor differential pressure sensor |
|
| Test particle | Ambient particles | |
| Particle Size | Over 0.3 μm | |
| Detector flow rate | 2.84 L/min | |
| Upper limit value | 5000 CPS | |
| Set time range | 0 - 99 seconds | |
| Flow rate | 42.5 L/min *customizabe, please inquire | |
| Collection efficiency calculation formula | 1-{Count Value (C2) x Blank Value} / Count Vlue (C1) x 100 (%) | |
| Measurement Time | COUNT control: set up the upper stream within measuring range TEST TIME control: setup the test length between 0 t o - 9 9 seconds |
|
| Operating Environment | 0 - 40 ℃ 0 - 90％ RH *without condensation | |
| Power Supply | AC 100, 50/60 Hz, 3 A | |
| Dimensions/Weight | W420 × D405 × H240 mm *excludes protrusions / approximately 19 kg | |
| Price (excluding tax) | Contact us | |
| Note | ||