Products

under construction.
Please contact us here.

overseas@sibata.co.jp

Product photo
Item Code		020030-05A
Capacity		0.5ml
allowable error		± 0.003
Full length		300
colour code		Black 2nd line
Quantity		10
Price (excluding tax)		Contact us
Note		* "Hall Pipette Super Grade" is produced at higher accuracy than the "volume tolerable error" of JIS R3505 class A. * The one with a symbol at the end of the item code is the packaging unit. Please be careful about the number.

Product photo
Item Code		020030-1A
Capacity		1ml
allowable error		± 0.006
Full length		345
colour code		Blue
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-2A
Capacity		2ml
allowable error		± 0.006
Full length		355
colour code		orange
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-205A
Capacity		2.5ml
allowable error		± 0.01
Full length		360
colour code		yellow
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-3A
Capacity		3ml
allowable error		± 0.01
Full length		360
colour code		black
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-4A
Capacity		4ml
allowable error		± 0.01
Full length		365
colour code		Red Red 2 Rails
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-5A
Capacity		5ml
allowable error		± 0.01 ^*
Full length		375
colour code		White
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-6A
Capacity		6ml
allowable error		± 0.01
Full length		390
colour code		Orange 2 main line
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-7A
Capacity		7ml
allowable error		± 0.01
Full length		410
colour code		Green 2 Main Line
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-8A
Capacity		8ml
allowable error		± 0.015
Full length		430
colour code		Blue
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-9A
Capacity		9ml
allowable error		± 0.015
Full length		436
colour code		black
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-10A
Capacity		10ml
allowable error		± 0.015 ^*
Full length		440
colour code		red
Quantity		10
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-15A
Capacity		15ml
allowable error		± 0.02
Full length		460
colour code		green
Quantity		5
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-20A
Capacity		20ml
allowable error		± 0.02
Full length		475
colour code		yellow
Quantity		5
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-25A
Capacity		25ml
allowable error		± 0.02 ^*
Full length		480
colour code		Blue
Quantity		5
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-30A
Capacity		30ml
allowable error		± 0.03
Full length		490
colour code		black
Quantity		5
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-40A
Capacity		40ml
allowable error		± 0.03
Full length		530
colour code		White
Quantity		5
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-50A
Capacity		50ml
allowable error		± 0.03 ^*
Full length		540
colour code		red
Quantity		5
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-100A
Capacity		100ml
allowable error		± 0.05 ^*
Full length		600
colour code		yellow
Quantity		5
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

Product photo
Item Code		020030-200A
Capacity		200ml
allowable error		± 0.07
Full length		720
colour code		Blue
Quantity		5
Price (excluding tax)		Contact us
Note		・ Used to weigh a certain volume liquid. It is also called a full amount of pipettes. ・ The scale is usually only one bottle, and the scale of the scale is thin, so the scale is more accurate than the same capacity mespipetto. ・ The scale shows the amount of excretion volume and the scale to the scale, indicating the volume when the entire amount is discharged. The TD that means outing is displayed. (TD: to Deliver abbreviation) ・ The scale represents the volume when water at 20 ° C is measured. ・ JIS standard (R3505) stipulates high -precision class A and standard class B. ・ We have two types of JIS class A's tolerance errors, “Custom A” and “Super Grade”, which exceeds class A. ・ Our hole pipette uses DUROBAX®, a glass material with good liquid. ● How to use hole pipet 1. Soak the tip of the hole pipet in the bottom of the liquid container and suck up with the mouth above the line. (Note that if the liquid in the container is small, it will inhale into the mouth with the air. In the case of harmful liquids, use a safety pipeter, etc.) (To stop the liquid above the target line) 3. Loosen the pressed index finger, slowly drop the liquid, and adjust the menniskus to the target line. 4. Put the tip on the inner wall of the container, release your finger, and discharge the liquid. (Naturally flowing without blowing) Warm and push out. (Small things below 5 ml are blown out lightly with your mouth) & nbsp; ● Precautions for using hole pipet The liquid of the container must be more than the amount of sucking. If it is small, it is dangerous to get involved in the air and inhale it into your mouth. In addition, it is often said that heating and drying is "the scale goes crazy", but there is no problem with general heating drying. In the manufacturing process, white prints and silver stains are burned at a high temperature of 500 ° C or more after hitting the scale. A literature that examines "whether heating affects the scale of the glass bodies" has been announced. However, please note that when heating and drying. It can be damaged by a thermal impact. If you put a freshly washed volume in the upper row of the heated and dryer, depending on the temperature, it may be damaged by the temperature difference from the dropped drops. It is recommended. When using a heated dryer, pay attention to the setting temperature and how to put the glass equipment.

　