Dispensers, “Macro Pipet”, with tip
Products
under construction.
Please contact us here.
Glassware
Dispensers, “Macro Pipet”, with tip
Dispensers, "Macro Pipette", with tip
Information by Item Code (Specifications)
Product photo |
|
|
---|---|---|
Item Code | 025060-01 | |
Standard | 1ml | |
Scale | 0.1 | |
Accuracy(%) | ± 1 | |
Reproducibility(%) | ± 1 | |
Dispensing capacity | 0.2-1ml | |
Accessories | ・ 2 chips ・ Grease 1 -pin press (jigs) 1 |
|
Price (excluding tax) | Contact us | |
Note |
Product photo |
|
|
---|---|---|
Item Code | 025060-02 | |
Standard | 2ml | |
Scale | 0.1 | |
Accuracy(%) | ± 1 | |
Reproducibility(%) | ± 1 | |
Dispensing capacity | 0.4-2ml | |
Accessories | ・ 2 chips ・ Grease 1 -pin press (jigs) 1 |
|
Price (excluding tax) | Contact us | |
Note | ・ By turning the push button, the adjuster moves along the scale of the display board. If you tighten the lock screws to the scale of the display board, you can make good reproducibility. ・ Since the contact of the sample solution when sucking is only inside the tip, the body is not contaminated. It can be used continuously by replacing the chips. ・ The grip is lightweight and soft operability. Can be used with one hand. ・ 5 years warranty ・ Use PP for the glue part, piston is PTFE |
Product photo |
|
|
---|---|---|
Item Code | 025060-05 | |
Standard | 5ml | |
Scale | 0.5 | |
Accuracy(%) | ± 1 | |
Reproducibility(%) | ± 1 | |
Dispensing capacity | 1 to 5 ml | |
Accessories | ・ 1 chip ・ Grease 1 -pin press (jigs) 1 |
|
Price (excluding tax) | Contact us | |
Note | ・ By turning the push button, the adjuster moves along the scale of the display board. If you tighten the lock screws to the scale of the display board, you can make good reproducibility. ・ Since the contact of the sample solution when sucking is only inside the tip, the body is not contaminated. It can be used continuously by replacing the chips. ・ The grip is lightweight and soft operability. Can be used with one hand. ・ 5 years warranty ・ Use PP for the glue part, piston is PTFE |
Product photo |
|
|
---|---|---|
Item Code | 025060-010 | |
Standard | 10ml | |
Scale | 0.5 | |
Accuracy(%) | ± 1 | |
Reproducibility(%) | ± 1 | |
Dispensing capacity | 2-10 ml | |
Accessories | ・ 1 chip ・ Grease 1 -pin press (jigs) 1 |
|
Price (excluding tax) | Contact us | |
Note | ・ By turning the push button, the adjuster moves along the scale of the display board. If you tighten the lock screws to the scale of the display board, you can make good reproducibility. ・ Since the contact of the sample solution when sucking is only inside the tip, the body is not contaminated. It can be used continuously by replacing the chips. ・ The grip is lightweight and soft operability. Can be used with one hand. ・ 5 years warranty ・ Use PP for the glue part, piston is PTFE |