High Volume Air Sampler HV-RW / aerosol sampling
under construction.
Please contact us here.
| Product photo |
|
|
|---|---|---|
| Item Code | 080130-1201 | |
| Model | HV-RW(for Dioxins) | |
| Suction Pump | Brush-less blower | |
| Flow Rate Detection | Differential pressure detection system | |
| Power Failure Processing | Operation prior to the outage continues after recovery from the outage | |
| Flow Accuracy | Within ±5 % of the set flowrate value | |
| Material | Aluminum | |
| Set Flow Rate Range | 100~1200L/min | |
| Filter Paper | 8X10square filter paper | |
| Urethane Foam | nothing | |
| Mass | Approximately31kg | |
| Suction Flow Rate | 1000L/min (square filter QR-100+) |
|
| Display | Touch panel LCD screen (with backlight) | |
| Operating Environment | Temperature 0-40ºC | |
| Power Supply | AC180-264V 5A Cable length : 3m | |
| Size | While using : 575(W)x575(D)x1420(H)mm, Collection port height : 1210mm(From the installation surface) Folded state : 575(W)x575(D)x960(H)mm |
|
| Composition | Shelter 1 set Control unit 1 set Hopper part 1 set Filter case 1set Through pipe 1 set |
|
| Price (excluding tax) | Contact us | |
| Note | ・ This weatherproof sampler is intended for installation in order to collect toxic substances in the air at high flowrates. ・ It has a wide flowrate range, and can be used for both dust and dioxins by replacing the components. ● The folding design is convenient for transport and storage. ● The constant flowrate unit suppresses suction flowrate drops associated with collecting volume increases. ● A touch panel is used for the display unit. ● Particle separation characteristics can be obtained by attaching an optional particle size separator. ● It is designed to operate quietly. | |
| Product photo |
|
|
|---|---|---|
| Item Code | 080130-1203 | |
| Model | HV-RW() | |
| Suction Pump | Brush-less blower | |
| Flow Rate Detection | Differential pressure detection system | |
| Power Failure Processing | Operation prior to the outage continues after recovery from the outage | |
| Flow Accuracy | Within ±5 % of the set flowrate value | |
| Material | Aluminum | |
| Set Flow Rate Range | 100~1200L/min | |
| Filter Paper | 8X10square filter paper | |
| Urethane Foam | 90X50mm | |
| Mass | Approximately31kg | |
| Suction Flow Rate | 100or700L/min(square filter QR-100+ 2urethane foams are installed) | |
| Display | Touch panel LCD screen (with backlight) | |
| Operating Environment | Temperature 0-40ºC | |
| Power Supply | AC100V 10A Cable length : 3m | |
| Size | While using : 575(W)x575(D)x1420(H)mm, Collection port height : 1210mm(From the installation surface) Folded state : 575(W)x575(D)x960(H)mm |
|
| Composition | Shelter 1 set Control unit 1 set Hopper part 1 set Filter case 1set Shuttle tube 1 set |
|
| Price (excluding tax) | Contact us | |
| Note | ・ This weatherproof sampler is intended for installation in order to collect toxic substances in the air at high flowrates. ・ It has a wide flowrate range, and can be used for both dust and dioxins by replacing the components. ● The folding design is convenient for transport and storage. ● The constant flowrate unit suppresses suction flowrate drops associated with collecting volume increases. ● A touch panel is used for the display unit. ● Particle separation characteristics can be obtained by attaching an optional particle size separator. ● It is designed to operate quietly. ● This sampler for dioxins is based on the manual specified by the Japanese Ministry of the Environment. | |